11.Select a base tone by pressing or , then press .

When “Confirm Tones” is selected, the syllable names are played back in the selected tone.

12.Select “OK”, then press .

13.Press or to select “Details Editor”, then press .

14.Press or to select “Algorithm x”, then press .

15.Select an algorithm you wish to set by pressing or , then press .

If you do not wish to change the operator, skip to step 20.

16.Select an operator you wish to change by pressing

or , then press .

The basic note parameter is set in advance.

17.Select a parameter you wish to change by pressing

or .

18.Press or to change the content of the parameter.

For details of parameter, see pages 53 to 54.

When you press , the syllable names are played back in the selected content of the parameter. Repeat steps 17 and 18 to change another content of the parameter.

19.Press or to select “Setup End”, then press

.

If you do not wish to change the effect frequency, skip to step 22.

20.Press or to select “Effect Frequency”, then press .

21.Select the effect frequency you wish to set by pressing or , then press .

22.Press or to select “Details End”, then press .

23.Press or to select “Save”, then press . Your original tone is registered.

55 Fun & Games

Page 56
Image 56
Sharp O2 manual Select a base tone by pressing or , then press