Sharp 70LE745U Watching TV, Turning On/Off the Power, Initial Installation, Location & Time

Watching TV

Turning On/Off the Power

POWER

POWER (On/Standby)

Initial Installation

When you turn on the TV for the fi rst time, it will automatically memorize the broadcasting channels available in the region where you live. Perform the following steps before you press POWER on the remote control unit.

1.Insert the batteries into the remote control unit. (See page 11.)

2.Connect the antenna cable to the TV. (See page 11.)

3.Plug in the AC cord to the AC outlet. (See page 10.)

Press POWER on the TV or on the remote control unit to turn the power on.

•The Initial Installation starts when the TV powers on for the fi rst time. If the TV has been turned on before, the Initial Installation will not be invoked. For changing the settings of the Initial Installation, perform "EZ setup" on the Initial Setup menu on page 36.

Press POWER on the TV or on the remote control unit again to turn the power off.

•The TV enters standby and the image on the screen disappears.

•If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.

•Weak electric power is still consumed even when the TV is turned off.

Language (Language setting)

Select from among 3 languages: English, French and Spanish.

1Press a/b to select the desired language listed on the screen, and then press ENTER.

Language
Location & Time
TV Location	English
Antenna & Cable/STB
	Français
Air/Cable
	Español
CH Search
Network

Completed

Location & Time

Make settings for the country, area and time zone where you use the TV.

2Press a/b to select "United States", "Canada" or "Mexico", and then press ENTER.

United States

Canada

Mexico

19