Sharp AL-2030, AL-2040CS Press the SCAN () key, Press the right copy quantity, Using the SCAN key to begin scanning, Place the original you wish to scan on the document glass/SPF

Using the SCAN key to begin scanning

•Scanning is not possible during a copy job.

• If the SCAN () key is pressed during a print job, the scan job will be stored.

•When scanning an original that has been placed in the SPF, only one original can be placed unless you are using Sharpdesk.

1

2

3

Press the SCAN () key.

The unit enters scan mode.

Place the original you wish to scan on the document glass/SPF.

For the procedure for placing the original, see "ORIGINAL PLACEMENT"	4
(p.47).
Press the right copy quantity

key to display the number of the application that you wish to use for scanning.

The application numbers are initially as follows.

Application

number

Application launched

SC1Sharpdesk

SC2E-mail

SC3Fax

SC4OCR

SC5 Microsoft Word

SC6Filing

To check the settings, see "Scan Button Destination Setting Dialog Box" (p.38) and then open the settings window of the Button Manager.

41