Sharp AL-2030, AL-2040CS manual 72

		AL-2030	AL-2040CS
Bit depth		1 bit or 8 bit/pixel
Sensor		Color CCD
Scanning speed		Max. 2.88ms/line
Memory		8 MB	16 MB
Power supply		120V, 60Hz, 8.0A
Power consumption		Max. 1.0kW
Overall	Width	31-9/16" (802mm)	31-9/16" (802mm)
dimensions	Depth	17-33/64" (445mm)	17-33/64" (445mm)
Weight		37.04 lbs. (16.8kg)	44.97 lbs. (20.4kg)
(Approximately) *8
Unit	Width	20-25/64" (518mm)	20-25/64" (518mm)
	Depth	17-33/64" (445mm)	17-33/64" (445mm)
dimensions
	Height	14-3/32" (358mm)	17-33/64" (445mm)
Operating conditions		Temperature: 50°F to 86°F (10°C to 30°C)
		Humidity: 20% to 85%
Emulation		SHARP GDI
Interface port		USB interface (USB 2.0 Full	USB interface (USB 2.0 Full
		Speed)	Speed) / LAN interface (10 Base-T)
		Sound power level LwA
		Copying mode: 6.2B
		Standby mode: 3.2B
		Sound pressure level LpA (reference) (Bystander positions)
Noise level		Copying mode: 48dB(A)
		Standby mode: 16dB(A)
		Sound pressure level LpA (reference) (Operator position)
		Copying mode: 52dB(A)
		Standby mode: 16dB(A)
		Noise emission measurement in accordance with ISO7779.
Emission concentration		Ozone:0.02 mg/m3 or less
(measurement according		Dust:0.075 mg/m3 or less
to RAL-UZ 62: Edition		Styrene:0.07 mg/m3 or less
Jan. 2002)

*1 When standard 8-1/2" x 11" (A4) paper is used under the operating conditions.

*2 Feed paper lengthwise only.

*3 Leading and trailing edges.

*4 Along the other edges in totals.

*5 When making multiple duplex copies, the copy speed will vary based on the environment conditions. *6 Print speed during printing of the second sheet and following sheets when using 8-1/2" x 11"

(A4) plain paper in the tray 1 and performing continuous one-sided printing of the same page.

*7 The first-copy time is measured after the power save indicator turns off following power on, using the document glass with the polygon rotating in the copy ready state and "Selection of copy start state" set to ON in the user programs (8-1/2" x 11" (A4), paper fed from paper tray). The first-copy time may vary depending on machine operating conditions and ambient conditions such as temperature.

*8 Not including TD and drum cartridges.

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

70