SCANNER FUNCTIONS
103
Storing destinations for Scan to Desktop
The destination for Scan to Desktop is stored by the Sharp Network Scanner Tool
Setup Wizard when "Network Scanner Tool" is installed in your computer. For this
reason, there is no need to store the Scan to Desktop destination in the Web page.
(The Network Scanner Tool is on the "Sharpdesk" CD-ROM that accompanies the
machine.)
For information on Scan to Desktop system requirements, installing the Network
Scanner Tool, and storing the destination, see the Sharpdesk Information Guide.
Normally your computer is stored as the destination by the method indicated above.
The following page for storing Scan to Desktop destination information appears
when [Destination] is selected in the menu frame, followed by [Desktop]. This page is
used mainly by the system administrator in the following circumstance.
When another machine that also has the network function is added to your
network and you wish to send an image scanned on the new machine to a
destination stored on the existing machine.
See "Editing and deleting programmed transmission destinations" (p.107) to select
the Scan to Desktop destination information that you wish to use on the new
machine and enter the displayed information in this screen in the new machine.
(When you have completed all entries, click [Submit].)
If there are several destinations that you wish to use on the new machine, repeat this
procedure as needed.
If the information entered here differs from the information entered on the host
computer, transmission/reception will not be possible.
For the settings, see the following table.