27

REDUCTION/ENLARGEMENT/ZOOM

Copies can be reduced down to 25% or enlarged up to 400%. (When the RSPF is
being used, the zoom copy ratio range is 50% to 200%.) The [ZOOM] key can be
pressed to quickly select a ratio from among eight preset ratios. In addition, the [ ]
key ( ) and [ ] key ( ) can be pressed to select the ratio in increments of 1%.
1Check the original and paper size, and place the original(s).
2Press the [ZOOM] key.
3Press the [ZOOM] key and/or [ ] key ( ) or [ ] key ( ) to

select the desired copy ratio and then press the [OK] key.

Selecting a preset ratio
The preset ratios change as follows each time the
[ZOOM] key is pressed:
"100%" → "86%" → "70%" → "50%" → "25%" →
"400%" → "200%" → "141%".
Fine adjustment of the ratio
The ratio can be adjusted from 25% to 400% in
increments of 1%.
Use the [ ] key ( ) or the [ ] key ( ) for
fine adjustment.
4Select the number of copies and any other copy settings, and

then press the [START] key ( ).

The copy will be delivered to the paper output tray.
• To return the ratio to 100%, press the [ZOOM] key until 100%
appears.
• Press the [ZOOM] key to set the approximate ratio, then press the
[ ] ke y ( ) or [ ] key ( ).
• To decrease or increase the zoom ratio rapidly, hold down the [ ]
key ( ) or [ ] key ( ).
The ratio will stop changing at each of the preset ratios. To continue
changing the ratio, release the key and then hold it down again.
COPY RATIO
- 100% +
A4 TO B5
- 86% +
ZOOM
- 99% +