93

SETTINGS AND PROGRAMMING REQUIRED FOR

THE NETWORK SCANNER FEATURE

To use the Network Scanner feature, s ettings for the SMTP server, DNS s erver, and
destination addresses must be configured.
To configure the settings, use a computer that is connected to the same network as
the machine to access the machine's Web server. The Web page can be viewed with
your Web browser (Internet Explorer 5.5 or later (Windows), or Netscape Navigator
6.0 or later).

How to access the web page and view help

Use the following procedure to access the Web pages. [Help] can be clicked at the
bottom of the menu frame to view information on the various function settings that
can be operated remotely over the network from the machine's Web pages. For the
settings of each function, see the explanations in Help.
1Open the Web browser on your computer.
Supported browsers:
Internet Explorer 5.5 or later (Windows)
Netscape Navigator 6.0 or later
2In the "Address" field of your Web
browser, enter the IP address of
the machine.
When the connection is complete, the
Web page will appear in your Web
browser.
"ABOUT THE WEB PAGE (FOR
USERS)" (p.94)
3Click [Help] under the menu
frame.
For an explanation of a function or
setting in the Web page, click the
corresponding item in the Help screen.
4Close the Web page.
When you have finished using the Web
page, click the (close) button in the
top right corner of the page.