Sharp AR-M205, AR-M160 setup guide Setting UP Button Manager, Windows XP

SETTING UP BUTTON MANAGER

Button Manager is a software program that works with the scanner driver to enable scanning from the operation panel of the machine.

To scan using the operation panel of the machine, Button Manager must be linked with the scan menu keys on the machine. Follow the steps below to link Button Manager to scanner events.

Windows XP

1 Click the "start" button, click "Control Panel", click "Printers and Other Hardware", and then click "Scanners and Cameras".

2 Click the "SHARP AR-XXXX" icon and select "Properties" from the "File" menu.

3 In the "Properties" screen, click the "Events" tab.

4 Select "ScanMenu SC1" from the "Select an event" pull-down menu.

5 Select "Start this program" and then select "Sharp Button Manager A" from the pull-down menu.

6 Click the "Apply" button.

7 Repeat Steps 4 through 6 to link Button Manager to "ScanMenu SC2" through "ScanMenu SC6".

Select "ScanMenu SC2" from the "Select an event" pull-down menu. Select "Start this program", select "Sharp Button Manager A" from the pull-down menu, and then click the "Apply" button. Do the same for each ScanMenu through "ScanMenu SC6".

When the settings have been completed, click the "OK" button to close the screen.

Button Manager is now linked to the scan menu keys (1 through 6).

The scan settings for each of scan menu keys 1 through 6 can be changed in the setting window of Button Manager.

For the factory default settings of the scan menu keys, see "USING THE SCANNER MODE" in the Operation Manual. For the procedures for configuring Button Manager settings, see "Button Manager Settings" in the Online Manual.

12