Sharp AR-M160, AR-M205 setup guide Select AR-XXXX, and click the Properties button

SETTING UP BUTTON MANAGER

Windows 98/Me/2000

1 click the "Start" button, select "Settings", and then click "Control Panel".

2 Double-click the "Scanners and Cameras" icon.

If the "Scanners and Cameras" icon does not

Note	appear in Windows Me, click "view all Control
	Panel options".

3 Select "AR-XXXX", and click the "Properties" button.

In Windows Me, right click "AR-XXXX" and click "Properties" in the menu that appears.

4 In the "Properties" screen, click the "Events" tab.

5 Select "ScanMenu SC1" from the "Scanner events" pull-down menu.

6 Select "Sharp Button Manager A" in "Send to this application".

If other applications are shown, deselect the Note checkboxes for the other applications and

leave only the Button Manager checkbox selected.

7 Click the "Apply" button.

8 Repeat Steps 5 through 7 to link Button Manager to "ScanMenu SC2" through "ScanMenu SC6".

Select "ScanMenu SC2" from the "Scanner events" pull-down menu. Select "Sharp Button Manager A" in "Send to this application" and click the "Apply" button. Do the same for each ScanMenu through "ScanMenu SC6".

When the settings have been completed, click the "OK" button to close the screen.

Button Manager is now linked to the scan menu keys (1 through 6).

The scan settings for each of scan menu keys 1 through 6 can be changed in the setting window of Button Manager.

For the factory default settings of the scan menu keys, see "USING THE SCANNER MODE" in the Operation Manual. For the procedures for configuring Button Manager settings, see "Button Manager Settings" in the Online Manual.

13