![](/images/new-backgrounds/1192979/19297915x1.webp)
INSTALLING THE SOFTWARE
INSTALLATION IN WINDOWS 98/ME/2000 (USB CABLE)
1 | The USB cable must not be connected |
| 6 | Check the packages on the screen, |
| to the machine. Make sure that the cable |
|
| and then click the "Start" button. |
| is not connected before proceeding. |
|
| The software packages to be installed will be |
| If the cable is connected, a Plug and Play window |
|
| displayed on the screen. If an incorrect package |
| will appear. If this happens, click the "Cancel" button |
|
| is displayed, click the "Back" button and select |
| to close the window and disconnect the cable. |
|
| the correct packages. |
Note The cable will be connected in step 11.
2 Insert the CD-ROM into your CD-ROM drive.
3 ), and then
).
4 ).
If the language selection screen appears after Note you double click the "setup" icon, select the
language you wish to use and click the "Next" button. (Normally the correct language is selected automatically.)
7 The files required for installation of the MFP driver are copied (if "MFP Driver" was selected in Step 5).
Follow the on-screen instructions.
When you are asked how the printer is connected, select "Connected to this computer" and click the "Next" button.
5 Select the software packages to be installed and then click the "Next" button.
Software packages with a checkmark ( ) in the list on the screen will be installed.
Click the "Display README" button to show information on packages that are selected.
When the interface selection screen appears, select "USB" and click the "Next" button.
Caution |
In Windows 2000, if the following screen appears while the files are being copied (the message may appear more than once), click the "Yes" button.
If the following screen appears, click the "OK"
Note button.
When "The MFP driver installation is complete." appears, click the "OK" button.
The Button Manager installer will start.
6