Sharp BD-HP75U, BDHP75U Using Aquos Link, Controlling the Blu-ray disc player, Using 3D

Before Starting Playback

	EAQUOS PURE MODE				NOTE
Using AQUOS LINK
		When you connect this player to an AQUOS LCD
				• The 3D mode can be switched only when playback is
		TV compatible with AQUOS LINK and set “AQUOS			stopped.
Controlling the Blu-ray disc player
		LINK” to “Yes” (page 43), images automatically		• Depending on the connected TV, the images during
using AQUOS LINK		adjusted to the most suitable image quality for the			playback may switch to 2D images due to changes in
		AQUOS TV are output from the HDMI OUT terminal			the resolution, etc. Make sure the 3D image setting is
What is AQUOS LINK?		of this player.			performed on the TV.
			NOTE	• The 3D images may not be output as set in “HDMI
Using the HDMI CEC (Consumer Electronics					Video Out”.
Control), with AQUOS LINK you can interactively		• In order to make AQUOS LINK available, set “AQUOS		• When performing Fast Forward/Reverse, images are
operate this player with your SHARP AQUOS TV.			LINK” to “Yes” (See page 43).		shown in 2D.
What you can do with AQUOS LINK			Refer to the Operation Manual of the TV for details		CAUTION
			regarding setup.
When you connect this player to the LCD TV				• When viewing 3D images, viewing for a long period
compatible with AQUOS LINK using an HDMI cable,
		Using 3D			of time or lying on your back may cause eye strain
you can perform the functions listed below. (See
					and discomfort. In addition, 3D images may affect the
page 16 for connecting to the HDMI terminal).		This sets output of 3D images.			eyesight of young children/infants, so keep them from
EAutomatic input select function					viewing the images.
		To view 3D images, playback of 3D content (3D BD
When you start playback of this player, the input		video) is necessary with a 3D compatible TV and 3D
selector of the LCD TV will automatically switch to		glasses in addition to this player.
the LCD TV input terminal connected to the player
and the playback image will appear on the screen,
even if you are watching a TV program.

Playback

EAutomatic power off function

If you turn off the LCD TV when this player is in stop mode, the power of this player will be turned off automatically. (However, when playing back a disc or other content using this player, the power does not turn off.)

Press 3D to change to the 3D mode.

•Each time the button is pressed, the mode switches between “Auto(3D)” and “2D”.

•The status of the selected mode will be displayed on the TV screen.

EAutomatic power on function

When you switch to the LCD TV input terminal connected to this player, the power of this player will be turned on automatically.

Auto: Video signals are output as 3D when 3D content (3D BD video) is played or as 2D when 2D content is played.

2D: Even if 3D content (3D BD video) is played, video signals are output as 2D at all times.

•This setting (Auto(3D)/2D) can also be performed using the menu screen (See page 45).

23