Sharp BD-HP75U, BDHP75U Software Update Settings, Auto Update from Network, Update process, Setup

SETTINGS

				Update process
Software Update Settings
				1 When this player is turned on, the Internet
In this player, the software version can be updated				connection starts automatically.
using either one of the following methods.				• “Accessing...” blinks on the screen.
• Auto Update from Network
• Manual Update from Network
• Manual Update from USB memory device				• The current version of this unit software and the
					latest version of the update file on the network are
Auto Update from Network
					displayed when latest version of firmware has been
					found.
This function allows you to perform the update by
					To update this player software with update file,
accessing an Internet connection automatically to					select “Yes”, and go to step 2.
check if there is a new firmware version every time
the player is turned on.					Latest version of firmware has been found.
When using this function, it is required to perform					Firmware update is available.
the following settings in advance.					Proceed with update?
					Current Version :	xxxxxxxxxx
					Latest Version :	yyyyyyyyyy
	NOTE	Setup			If “Yes” will be selected, version update will start.
• Make sure that the LAN cable or the wireless LAN		1	Press a/bto select “Settings”, then press dor
	adapter is connected to this player and make sure that		ENTER.			Yes
	the wireless router/access point is connected to the	2
			Press a/bto select “Software Update			No
	Internet if using the wireless LAN adapter. (See pages
	18–19.)		Settings”, then press dor ENTER.
		3		• If the latest firmware version has been already
• Make sure to perform the communication settings. (See			Press a/bto select “Auto Update Setting”,
					updated, nothing is displayed on the screen.
	pages 46–49.)		then press dor ENTER.
• It may take time to access and download the update		4		2 Press ENTER to start updating.
			Press a/bto select “Yes”, then press ENTER.
	depending on the Internet connection and other factors.
			• After this, an Internet connection will be made

CAUTION	automatically every time this player is turned on.	Downloading latest firmware…
		Version :	yyyyyyyyyy

•Do not remove the LAN cable or the wireless LAN

adapter or unplug the AC cord while downloading or
updating software.	30%

3 When the software is successfully updated, a screen is displayed indicating that the update process is completed.

• If the update has failed, an error message appears. Retry the update after checking if the broadband Internet connection (pages 18–19) and communication settings (pages 46–49) are performed properly.

4 Press POWER to turn off the player before using again.

Settings

51