Sharp BDHP75U, BD-HP75U Audio Video Settings, Hdmi Video Out, Secondary Audio, Audio Out, Pcm

SETTINGS

Audio Video Settings

HDMI Video Out

This sets the resolution of the video output for the HDMI terminal of this player.

Normally set to “Auto” (factory preset value).

Item

Auto, 1080p, 1080i, 720p, 480p

NOTE

•When the BD player is connected to a 1080p 24Hz compatible TV and the “HDMI Video Out” is set to “Auto”, 1080p 24Hz will automatically be displayed when compatible discs are played back.

Secondary Audio

This toggles the clicking sound on the menu and audio with secondary video in picture in picture mode for BD-Video.

•Select “Off” when enjoying the high quality sounds of BD-Video.

Item

On, Off

Audio Out

You can set the audio output when connecting to SURROUND equipment.

1This sets the audio output connected to SURROUND equipment.

Item

HDMI Output: Select this when you connect using HDMI OUT terminal.

Digital Output: Select this when you connect using DIGITAL AUDIO OUT terminal (OPTICAL).

2You can set the audio output mode for each output terminal.

1This sets the audio output mode for HDMI OUT terminal when selecting “HDMI Output”.

NOTE

•When the secondary audio is set to “On”, PCM is automatically selected as the audio output mode.

Item

Bitstream:

•Select this when connecting to HDMI equipment with a built-in decoder for DOLBY DIGITAL, etc.

•Setting to Bitstream will output each audio signal by Bitstream.

PCM (Surround):

•Select this when connecting to multi-channel HDMI equipment.

•Setting to PCM (Surround) will output by LINEAR PCM by decoding audio signals recorded in each audio output mode such as DOLBY DIGITAL, DTS.

2This sets the audio output mode for DIGITAL AUDIO OUT (OPTICAL terminal) when selecting “Digital Output”.

Item

Bitstream:

•Select this when connecting to SURROUND equipment with a built-in decoder for DOLBY DIGITAL, etc.

•Setting to Bitstream will output each audio signal by Bitstream.

PCM:

•Select this when connecting to 2 channel stereo audio equipment.

•Setting to PCM will output by converting each audio signal into PCM 2 channel audio signal.

NOTE

•See page 54 for information on output of audio formats.

42