SETTINGS
6Select “Next”, then press ENTER.
• If selecting “Yes” in the step 5, go to the step 8.
7Enter your DNS address.
Enter your DNS address.
Primary
Secondary
Next
•The primary and secondary DNS addresses are entered using the screen for inputting characters. (See page 49.)
Regarding each of the setup values, confirm the specifications of your broadband router.
8Select “Next”, then press ENTER.
9For testing the connection to the Internet, after confirming the settings, press a/bto select “Test”, then press ENTER.
•“Test” is available only when setting to obtain the IP address automatically. “Test” cannot be selected if the IP address has not been obtained automatically.
Confirm the current setting.
IP Address | : xxx xxx xxx xxx |
Netmask | : xxx xxx xxx xxx |
Gateway | : xxx xxx xxx xxx |
DNS Address : xxx xxx xxx xxx
xxxxxx xxx xxx
MAC Address : xx xx xx xx xx xx
Test
Complete
•As a result of the test, if the Internet connection fails, enter the setup values manually.
10 Press a/bto select “Complete”, then press
ENTER.
11 Press HOME or EXIT to return to the HOME screen.
•To perform other settings, press j.
When selecting Wireless
CAUTION
•We recommend writing down the MAC address of the connected wireless LAN adapter in this operation manual (page 48) and keeping it in a safe place. The MAC address is labeled on the adapter or displayed on the “Current Ethernet setup info.” screen (See step 4 below).
•When performing the wireless communication setup, security information for the wireless router/access point (WEP, WPA or WPA2 key) is required. Check your wireless router/access point’s information prior to setup.
NOTE
•Wireless communication setup cannot be performed when the wireless LAN adapter is not inserted.
•Before this player can access the Internet wirelessly, setup of a wireless router/access point is required.
1Press a/bto select “Settings”, then press dor
ENTER.
2Press a/bto select “Communication Setup”, then press dor ENTER.
3Press a/bto select “Ethernet Setup (Wireless)”, then press dor ENTER.
4Press a/bto select “Change”, then press
ENTER.
Current Ethernet setup info.
MAC Address : xx xx xx xx xx xx
Access Point | : Not Selected | |
IP Address | : Auto Setup | |
Netmask | : Auto Setup | |
Gateway | : Auto Setup | |
DNS | : Auto Setup | |
|
|
|
| Change |
|
|
| |
| Initialize |
|
•For initializing the current setting, select “Initialize”, then press ENTER.
5The player scans all of the available access points and displays the points with the “Other Network” selection bar on the screen.
•During searching access point(s), “Accessing...” appears on the screen.
•Up to 6 items (5 access points and the “Other Network” selection bar) are displayed on the screen.
•When there are six or more items retrieved, display the next screen by selecting “Next”, then pressing ENTER. (The “Other Network” selection bar is always displayed last.) When no available access points are retrieved, only the “Other Network” selection bar is displayed on the screen.
6Press a/bto select “desired access point” or “Other Network”, then press ENTER.
•For access points which are set to hide the SSID using the wireless router, select “Other Network” to set the access point.
Select the access point.
XXXXXXXXXXXX
YYYYYYYYYYYY
Other Network
• If selecting “desired access point”, go to step 9. |
|
• If selecting “Other Network”, go to the next step. | Settings |
|
(Continued on the next page)
47
