7 Press the 0/R (0 R) button to start playback.
Playback will begin from track 1 on the disc you have selected to play. After that disc finishes playing, the next disc will automatically play.
When the last track on the third disc has finished playing, the CD player will stop automatically.
When there is no CD in one of the disc 1 - 3 positions, that position will be skipped and the next CD will be played.
To interrupt playback:
Press the CD 6 button on the remote control.
To resume playback from the same point, press the 0 R button.
To stop playback:
Press the ■ (CD ■) button.
To remove the CDs:
While in the stop mode, press the 7 OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to rotate the disc tray and remove the remaining disc.
After use:
Press the POWER button to enter the power
Caution:
Do not place two CDs in one disc tray.
Do not push the disc tray while it is moving.
Do not turn the disc tray by hand. This may cause malfunctions.
If the power fails while the tray is open, wait until the power is restored.
If the disc tray is stopped forcibly,
If this occurs, press the POWER button to enter the
If TV or radio interference occurs during CD operation, move the unit away from the TV or radio.
If a disc is damaged, dirty, or loaded upside down, the disc will be skipped.
To locate the beginning of a track
To move to the beginning of the next track:
Press the W PRESET 2 4 button for less than 0.5 seconds during playback.
●You can skip to any track by pressing the WPRE-
SET 2 4 button repeatedly until the desired
track number appears.
To restart the track being played: |
|
|
| |
Press the 5 3 PRESET X button for less than 0.5 seconds during |
|
| ||
playback. |
|
| – | |
| ● You can skip to any track by pressing the |
| ||
| PlaybackCD | (CDs)CDatoListening– | ||
| 5 3 PRESET | X button repeatedly until the | ||
|
|
| ||
| desired track number appears. |
|
| |
|
|
|
| |
Notes: |
|
|
| |
| You can locate the beginning of a track on a single disc only. |
|
| |
| The 5/3 PRESET X or W PRESET 2/4 button on the remote control al- |
|
| |
| lows you to locate the beginning of a track. |
|
|
|
| To locate the desired portion |
|
| |
|
|
| ||
|
|
| ||
|
|
|
|
|
For audible fast forward: |
|
|
| |
Press and hold down the W PRESET 2 4 button during playback. |
|
| ||
For audible fast reverse:
Press and hold down the 5 3 PRESET X button during playback.
Notes:
Normal playback will resume when the 5 3 PRESET X or W PRESET 2 4 button is released.
You can locate the desired portion on a single disc only.
When the end of the last track is reached during fast forward, “END” will appear in the display and CD operation will be paused. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode.
The 5/3 PRESET X or W PRESET 2/4 button on the remote control al- lows you to locate the desired portion.
19
