To record on a tape from DVD or VCR etc.
1 Load a cassette in the TAPE 2 cassette compartment.
2 Press the DVD/VCR button.
To select the unit connected to the DVD jack
Press the DVD/VCR button repeatedly to select “DVD”.
To select the unit connected to the VIDEO/AUX IN jack
Press the DVD/VCR button repeatedly to select “VCR”.
3 Press the REC PAUSE I6 (I6) button.
4 Press the 0/R ( 0 ) button.
5 Play the DVD, VCR etc.
Note:
A DVD player allows you to select the “PCM” or “DOLBY DIGITAL” audio output mode. Before playing a Dolby digital sound disc, be sure to set the unit in the “DOLBY DIGI- TAL” mode. For more details, see the operation manual for your DVD player.
Using subwoofer speakers of other equipment
When a commercially available speaker with a
1 Connect an RCA cord from a commercially available speaker with a
2 Set the unit to
Note: | FeaturesAdvanced | SystemYourEnhancing– – |
|
| |
No sound is heard from the external subwoofer when in the Bypass/Virtual mode. |
|
|
Headphones |
|
|
Before plugging in or unplugging the headphones, reduce the volume. |
|
|
Be sure your headphones have a 1/8" (3.5 mm) diameter plug and are between 16 |
|
|
ohms and 50 ohms impedance. The recommended impedance is 32 ohms. |
|
|
Plugging in the headphones disconnects the speakers automatically. Adjust the |
|
|
volume using the VOLUME control. |
|
|
Note:
It is not possible to use the Normal/Phantom or Dolby Digital surround modes when using your headphones.
When headphones are connected to the headphones jack, the Normal/Phantom mode will be canceled. (The unit will be set to the Bypass mode automatically.)
39