Sharp CD-DD4500 operation manual Listening to the Memorized Station, Memorizing a station

Listening to the Memorized Station

CD-DD4500

Memorizing a station

You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning)

1 Perform the steps 1 - 3 in “Listening to the Radio” on page 22.

2 Press the MEMORY/SET button to enter the preset tuning saving mode.

3 Within 30 seconds, press the 5 3 PRESET X or W PRESET 2 4 button to select the preset channel number.

Store the stations in memory, in order, starting with preset channel 1.

4 Within 30 seconds, press the MEMORY/SET button to store that station in memory.

If the “MEMORY” and preset number indicators go out before the station is memorized, repeat the operation from step 2.

5 Repeat steps 1 - 4 to set other stations, or to change a preset station.

When a new station is stored in memory, the station previously memorized will be erased.

Note:

The backup function protects the memorized stations for a few hours should there be a power failure or the AC power cord disconnection.

To recall a memorized station

Press the 5 3 PRESET X or W PRESET 2 4 button for less than 0.5 seconds to select the desired station.

Preset channel Frequency and frequency band

To scan the preset stations

The stations saved in memory can be scanned automatically. (Preset memory scan)

1 Press the 5 3 PRESET X or W PRESET 2 4 button for more than 0.5 seconds.

The preset number will flash and the programmed stations will be tuned in sequentially, for 5 seconds each.

2 Press the 5 3 PRESET X or W PRESET 2 4 button again when the desired station is located.

To erase entire preset memory

1.Press the POWER button to enter the stand-by mode.

2.Press the POWER button while holding down the TUNER (BAND) button and X- BASS/DEMO button until “TUNER CL” appears.

Radio – Listening to the Memorized Station –

Listening to the Radio (See page 22.) 23