Changing the Speaker Setting
You can change the setting as you like.
The initial set up was made when shipped from the factory.
The unit can be used as it is, straight out of the box.
Speaker size setting
1 Press the MENU button repeatedly to select “SP SIZE”.
2 Within 8 seconds, press the ITEM button to select “FRONT”.
The front speaker indicators will light up.
3 Within 8 seconds, use the SET UP (W or X) button on the re- mote control to select “LARGE” or “SMALL”.
LARGE:When the front speakers can reproduce low frequencies (speakers which can reproduce sounds lower than 60 Hz)
SMALL: When the front speakers cannot reproduce extremely low frequencies
4 Repeat the operation in steps 2 and 3 above to select “SUR- ROUND”, “CENTER” and
Each of these items can be set separately.
Surround speakers: |
| disappear |
|
|
|
|
|
|
Center speaker: |
| disappear | ||
|
|
|
|
|
|
|
|
|
|
Subwoofer:disappear
disappear
YES: When the speakers are connected
NO: When no speaker is connected (When NO is selected, the indica- tor for that speaker position will go out.)
INT: Setting of the internal subwoofer
EXT: Setting of the external subwoofer (see page 39.)
Note:
When all 5 speakers have been connected, set each of the items to “YES” and the subwoofer to
The sound is output from the subwoofer when in the Bypass/Virtual mode, even if the setting of subwoofer is changed.
Operation | Speaker Setting – |
Surround | – Changing the |
|
|
31
