Sharp LC-13E1E Setting a Child Lock, To set a Child Lock for all programmes with a time limit

Useful Features (Continued)

Child Lock (Continued)

[3]Setting a Child Lock

There are four different ways of activating a child lock:

1.General child lock for all programmes immediately

2.General child lock for all programmes with daily time limit

3.General child lock for all programmes with single time limit

4.Programme-position related child lock without time limit

The Child Lock comes into effect only after the LCD TV set has entered the standby mode and is then turned on again.

To set a Child Lock for all programmes with a time limit

BRIGHT		TEXT
		ROTATE
		T
HOLD	SUBPAGE REVEAL
SUBTITLE		END
		E
		OK
SOUND		MENU

M

CH

TV/VIDEO

</>

END

]/[

OK

Channel Select

1 Perform steps 1 to 3 in

[2]Changing/Cancelling a PIN to display the “Child lock” screen.

2 Press ]/[ to select “For all programmes”, and then press OK to display the “For all programmes” screen.

3 Press ]/[ to select the desired item. (See the table below.)

4 Press </> to select the desired choice, and, if required, input digits with Channel Select.

Child lock

For all programmes For individual progr. only

Change PIN		[1234]
Cancel PIN
OK	M	Back E End

For all programmes
Immediately			[ no]
Daily			[ no]
Once			[ no]
OK	M	Back	E End

5 Press END to exit.

Note: Note:

•If the current clock time is within the time limit, the Child Lock is activated immediately after the LCD TV set is turned off and on again. For example, if the current clock time is 9:00 and the time limit is specified from 22:00 to 14:00, the lock is effective from 9:00 to 14:00.

•When a Child Lock is set for all programmes with a time limit, the “Time” item is not displayed in the TV menu and cannot be selected.

Adjustment item	Choice/Input value
Immediately		no	yes
Daily	no	HH:MM-HH:MM
Once	no	HH:MM-HH:MM
Warning:

Description

Select “yes” to activate the Child Lock immediately (after the LCD TV set has been turned off and on again). The lock remains effective until “no” is selected.

Input the start and end time for a daily-recurring Child Lock. The lock is activated everyday unless “no” is selected.

Input the start and end time for a once-only Child Lock. The length of the period should be up to 24 hours.

•The timer takes its clock information from the Teletext broadcast. The teletext broadcast may be in a different time zone and therefore child lock timer may not activate as expected. Concerning this detail, please refer to page 39.

31