Sharp LC-22LE240E LCD TV and Operating Buttons, Viewing the Connections Back Connectors

Models: LC-22LE240E

1 44
Download 44 pages 18.18 Kb
Page 10
Image 10

LCD TV and Operating Buttons

FRONT and REAR VIEW

Control buttons VIEW

Control Buttons

1. Up direction

2. Down direction

3. Programme/Volume / AV / Standby-On selection switch

Note:You can move the switch, upward or downward to change the volume. If you want to change channels, press the middle of the switch once (Position 3) and then move upward or downward. If you press the middle of the switch once more, source OSD will be displayed. To select desired source, move the switch upward or downward and release. If you press the middle of the switch and hold about a few seconds, the TV will switch to standby mode. Main menu OSD cannot be displayed via control buttons.

Viewing the Connections - Back Connectors

1

VGA

SPDIF

Coax.OUT

SCART

1.HDMI 1: HDMI Input

HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD TV is capable of displaying High Definition pictures from devices such as a High Definition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets can accept either 720p or 1080i signals. No sound connection is needed for an HDMI to HDMI connection.

2.RF Input connects to an aerial antenna system or a cable.

Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device to the television with an appropriate antenna cable, as shown in the illustration in the following pages.

3.SCART input or output for external devices. Connect the SCART cable between SCART socket on TV and SCART socket on your external device (such as a decoder, a VCR or a DVD player).

Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.

Note: S-VHS signal is supported via the scart socket (optional).

4.PC Input is for connecting a personal computer to the TV set.

Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.

5.SPDIF Coaxial Out outputs digital audio signals of the currently watched source. Use an SPDIF coaxial cable to trasfer audio signals to a device that has SPDIF input

English - 9 -

A01_MB62_[GB]_1910UK_IDTV_TC_PVR_BRONZE19_22942LED_ROCKER

_

ZIGGO_10075676_50200616.indd 9

15.03.2012 17:31:35

 

 

 

 

Page 10
Image 10
Sharp LC-22LE240E operation manual LCD TV and Operating Buttons, Viewing the Connections Back Connectors, Hdmi 1 Hdmi Input