Manual Tuning, Analogue Manual Search | Sharp LC-22LE240E guide

Analogue: Searches and stores analogue stations.

Digital Aerial & Analogue: Searches and stores both analogue and aerial DVB stations.

Digital Cable & Analogue: Searches and stores both analogue and cable DVB stations.

•Whenever you select an automatic search type and press OK button, a conﬁrmation screen will appear on the screen. To start installation process, select Yes, to cancel select No by using .“” or “” and OK button.

•After auto channel scan type is set and selected and conﬁrmed, installation process will start and progress bar will move along. Press “MENU” button to cancel process. In such a case, located channels are not stored.

Manual Tuning

HINT: This feature can be used for direct broadcast entry.

•Select Manual Channel Scan from the Installation menu by using “”/“” and OK buttons. Manual Scan options screen will be displayed.

•Select the desired Search Type using “” or “

” button. Manual search options will change accordingly. Use “”/“” button to highlight an item and then press “” or “” button to set an option. You can press “MENU” button to cancel.

Digital Aerial Manual Search

In manual channel scan, the number of the multiplex or frequency are entered manually and only that multiplex or frequency are searched for the channels. After selecting search type as Digital Aerial, you must select the desired Band and then , you can enter the multiplex or frequency number using the numeric buttons and press OK button to search.

Band Options: D_Band = VHF 9-24

S_Band = VHF 12-20, UHF 21-41

K_Band = VHF 5-12, UHF 21-69

English

Digital Cable Manual Search*

In cable manual scan, you can enter frequency, modulation, symbol rate and network channel scan options. After selecting search type as Digital Cable, you can set the desired options and press OK button to search.

(*)If you have selected the Country option to Netherlands in First Time Installation, cable manual search option will not be available.

Analogue Manual Search

After selecting search type as analogue, you can use “”/“” button to highlight an item and then press “ ” or “” button to set an option.

Enter the channel number or frequency using the numeric buttons. You can then press OK button to search. When the channel is located, any new channels that are not on the list will be stored.

Analogue Fine Tune

•Select Analogue Fine Tune from the Installation menu by using “” or “” and OK buttons. Analogue ﬁne tune screen will be displayed. Analogue Fine Tune feature will not be available if there are no analogue channels, digital channels and external sources stored.