Installation

menu. If it is set to “disabled”, Store Mode will not be available after the First Time Installation. Note: If Store Mode is enabled, some features may be affected.

•Press OK button on the remote control to continue and the following message will be displayed on the screen:

To select the “Yes” or “No” option, highlight the item by using “” or “” buttons and press OK button.

Afterwards, the following OSD will be displayed on the screen:

If you select CABLE option, the following screen will be displayed (This screen will not be available if you have selected the Country as Netherlands. Automatic Channel Scan will be displayed instead. ):

You can select frequency ranges from this screen. For highlighting lines you see, use “” or “” button. You can enter the frequency range manually by using the numeric buttons on the remote control. Set Start and Stop Frequency as desired by using numeric buttons on the remote control. After this operation, you can set Search Step as 8000 KHz or 1000 KHz. If you select 1000 KHz, the Tv will perform search process in a detailed way. Searching duration will thus increase accordingly. When ﬁnished, press OK button to start automatic search.

If you select AERIAL option from the Search Type screen, the television will search for digital terrestrial TV broadcasts.

Note: You can press “MENU” button to cancel.

•After all the available stations are stored, Channel List will be displayed on the screen. If you like the sort channels, according to the LCN,please select “Yes” and than press “OK”.

•Press OK button to quit channel list and watch TV. If you have selected the Country option as Netherlands in First Time Installation,only OK and LOCK options will be displayed.

Press “MENU” button on the remote control and select Installation by using “” or “” button. Press OK button and the following menu screen will be displayed.

Select Automatic Channel Scan (Retune) by using “ ”/“” button and press OK button. Automatic Channel Scan (Retune) options will be displayed. You can select options by using “”/“” and OK buttons.