Sharp LC-22LE240E operation manual First Time Installation, Programme Options, Select Channel

(RECORD): the TV will start to record the selected progamme. You can press again to stop the recording.

Note: Switching to a different broadcast or source is not available during the recording.

/ : Page left / Page right.

Programme Options

In EPG menu, press the OK button to enter the “Event Options” menu.

Select Channel

In EPG menu, using this option, you can switch to the selected channel.

Record / Delete Record Timer

IMPORTANT: To record a programme, you should first connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable recording feature. Otherwise, recording feature will not be available.

•After you have selected a programme in EPG menu, press the OK button and and Options screen will be displayed. Select “Record” option and press the OK button. After this operation, a recording becomes set to the selected programme.

•To cancel an already set recording, highlight that programme and press the OK button and select the option “Delete Rec. Timer”. The recording will be cancelled.

Note: You cannot switch to any other channel or source while there is an active recording on the current channel.

Set Timer / Delete Timer

After you have selected a programme in EPG menu, press the OK button and and Options screen will be displayed. Select “Set Timer on Event” option and press OK button. You can set a timer for future programmes.

To cancel an already set reminder, highlight that programme and press the OK button. Then select “Delete Timer” option. The timer will be cancelled.

Note: It is not possible to record or set timer for two or more individual events at the same time interval.

First Time Installation

IMPORTANT: Ensure that the aerial or cable is connected before switching on the TV for the first time installation.

•When the TV is operated for the first time, installation wizard will guide you through the process. First, language selection screen will be displayed:

•Use “” or “” buttons to select your language and press OK button to set selected language and continue.

•After selecting the language, “Welcome!” screen will be displayed, requiring you to set Country, Search Type, Teletext Language,Store Mode and Scan Encrypted options.

•By pressing “” or “” button, select the country you want to set and press “” button to highlight Search Type option. Use “”/“” to set the desired search type. Available search types are digital only, analog TV only and full.When set, press “” to select Teletext Language. Use “”/“” to select the desired Teletext Language.

•When set, press “” to select Teletext Language. Use “” or “” to select the desired Teletext Language.

•Press “” button after setting Teletext Language option. Scan Encrypted will be then highlighted. You can set Scan Encrypted as Yes if you want to scan coded stations.Afterwards select the desired Teletext Language.

•You can activate Store Mode option by using left or right button. If the Store Mode is set to “enabled”, E-Pop option will be available in other settings

English - 16 -

A01_MB62_[GB]_1910UK_IDTV_TC_PVR_BRONZE19_22942LED_ROCKER _ ZIGGO_10075676_50200616.indd 16 15.03.2012 17:31:47