Power Control Menu
Power control setting allows you to save energy.
Example
Power Control
Power Saving
No Signal Off
No Operation Off
1Press MENU to display the MENU screen, and then press c/d to select "Power Control".
2Press a/b to select a specifi c adjustment item, and then press ENTER.
3Press a/b (or c/d) to select the desired setting, and then press ENTER.
4Press MENU to exit.
Power Saving
This function allows you to automatically reduce the backlight brightness in order to decrease the power consumption and increase the backlight lifespan.
Standard: Reduces the backlight brightness to 80%.
When set to “Standard”, “
” appears on the screen. Advanced: Reduces the backlight brightness to 70%.
When set to “Advanced”, “
” appears on the screen. Off: The backlight brightness is the same value of your
settings in the selected AV MODE.
•“Power Saving” does not function when you set “AV MODE” to “DYNAMIC (Fixed)”.
•When “OPC” is set to “On(Display)” or “On” while “Power Saving” is set to “Standard” or “Advanced”, the Power Saving leaf icon appears to the left of “OPC” in the Picture menu screen.
•When “OPC” is set to “Off” while “Power Saving” is set to “Standard” or “Advanced”, the Power Saving leaf icon appears to the left of “Backlight” in the Picture menu screen.
•You can select Power Saving by pressing POWER SAVING on the remote control unit. (See page 17.)
No Signal Off
When set to "Enable", the power will automatically shut down if there is no signal for 15 minutes.
•When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute.
•"Disable" is the factory preset value.
•When a TV program fi nishes, this function may not operate.
No Operation Off
You can set the time length the TV takes to automatically shut the power down when there is no operation.
30min/3Hour/Disable
•When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute.
•"Disable" is the factory preset value.
Setup Menu
Example
Setup
EZ Setup
CH Setup
Input Skip
Input Label
Parental CTRL
Position
PC Setup
PC Audio Select
HDMI Auto View
Audio Setup
Language
Reset
1Press MENU to display the MENU screen, and then press c/d to select "Setup".
2Press a/b to select a specifi c adjustment item, and then press ENTER.
•When you select "EZ Setup", "CH Setup", "Parental CTRL" or "Reset", you can enter the
3Press a/b (or c/d) to select the desired setting, and then press ENTER.
4Press MENU to exit.
EZ Setup
You can run EZ Setup again, even after setting up the preset channels.
Language: Select from among 3 languages (English, French and Spanish).
TV Location: Select "Home" or "Store" for the location where you plan to install the TV. This product qualifi es for ENERGY STAR V3.0 in Home mode default setting.
Home: “Power Saving” is set to "Off", and AV MODE is set to "STANDARD".
Store: “Power Saving” is set to "Off" and AV MODE is set to "DYNAMIC (Fixed)". Picture Reset and Feature Demo can be set.
Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)" regardless of whether Picture Reset is "On" or "Off". If you select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if there is no operation for 30 minutes. When "Off" is selected, AV MODE will be set to "DYNAMIC (Fixed)".
Feature Demo: When “On” is selected, after all the settings are completed, the Feature Demo screen is displayed if there is no operation for several minutes.
•ENERGY STAR qualifi cation is based on AV MODE "STANDARD".
Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for all channels viewable in the set area.
•See "Initial Setup" on page 14 for setting each item.
•If no channel is found, confi rm the type of connection made with your TV and try EZ Setup again.
23
