Menu operations
Connections menu
TV menu
Connections |
|
| Setup |
|
|
|
|
|
|
|
|
|
|
|
Decoder | EXT 2 |
|
| |
Input select |
|
|
|
|
HDMI setup |
|
|
|
|
Supply voltage | no (0V) |
|
| |
|
|
|
| |
Miscellaneous |
|
|
|
|
|
|
|
|
|
Decoder
Make sure to select the terminal (EXT 1 or 2) to which the decoder is connected.
NOTE
•This setting will be refl ected in the “Decoder stations” function under “Miscellaneous”. (Page 16)
Input select
For setting the signal type of external equipment.
Input source | Signal type |
|
|
EXT 1 | Y/C, CVBS, RGB |
|
|
EXT 2 | Y/C, CVBS |
|
|
EXT 4 | PC (RGB), COMPONENT |
|
|
NOTE
•If no (colour) image displays, try to change the other signal type.
•Check the operation manual of the external equipment for the signal type.
•TV, DTV, EXT3, EXT5 and EXT6 are not displayed in Input Select.
•If both CVBS and RGB signals are input to EXT 1 using a SCART cable, the TV may output an RGB signal even though you have designated CVBS for the respective terminal. This happens due to the setting of your external equipment.
HDMI setup
HDMI
1Press MENU and the TV menu screen displays.
2Press c/d to select “Connections”, and then press OK.
3Press a/b to select “HDMI setup”, and then press OK.
4Press a/b to select “EXT5” or “EXT6”, and then press OK.
5Press a/b to select the desired item.
6Press c/d to select the desired setting.
HDMI setup | Selectable | Description | |
items | items | ||
| |||
Signal type* | RGB/YCbCr | Select the video signal type | |
| 4:4:4/YCbCr 4:2:2 | from the HDMI terminal. | |
|
|
| |
Colour | ITU601/ITU709 | Select the internal colour | |
matrix* |
| space conversion method | |
|
| when an RGB signal is | |
|
| input. | |
|
|
| |
Dynamic | Normal/ | Select the signal amplitude | |
range* | Enhanced | range. Usually, select | |
|
| “Normal”. | |
|
|
| |
Auto view | Enable/Disable | Set whether or not to use | |
|
| Wide mode based on | |
|
| signal recognition, including | |
|
| an HDMI signal. | |
|
|
| |
Audio | Digital/Analogue | Select “Digital” for audio | |
select** |
| signal via the HDMI | |
|
| terminal. Select “Analogue” | |
|
| for audio signal via the | |
|
| AUDIO jack. | |
|
|
|
NOTE
•Refer to your external equipment operation manual for the signal type.
•Items with * may be greyed out depending on the type of signal input from the external equipment.
•Item marked ** is only available when EXT5 is selected.
15
