Sharp LC-37XD1E Setup menu, Menu operations Supply voltage, AV-Link EXT 2 only, Miscellaneous

Menu operations

Supply voltage

Setup menu

Antennas with an integrated amplifi er need a supply voltage on the antenna line. (Page 4)

AV-Link (EXT 2 only)

With this function you can transfer the station data of the TV (such as station preset number/name/channel/ frequency) to the recorder if the recorder is set up for AV-Link. This function is available only for conventional analogue stations.

1Press MENU and the menu screen displays.

2Press c/d to select “Connections”, and then press OK.

3Press a/b to select “AV-Link”, and then press OK.

4Select “Start transmission”, and then press OK.

•The TV transfers the station list to the AV-Link recorders connected to EXT 2.

Miscellaneous

EDecoder stations

Encrypted stations should be labelled as decoder stations, so that they can be decoded automatically by the connected decoder.

Items	Description
Select decoder	Press OK to mark an encoded station. The
station(s)	marking can be removed from a station that
	has already been marked by pressing the same
	key.
Sound encoding	For reception of encoded audio signals select
	either “always” if these are always encoded or
	“Automatic” if these are sometimes encoded.
	For audio signals which are always uncoded,
	select “never”.

EManual adjustment of AV standard

Ask your dealer which standard to select for specifi c AV equipment (if it is not recognised automatically). Select the appropriate external terminal (EXT 1- 3) and its AV standard as advised.

EAllow switching voltage

If this function is activated and you switch to an AV device (connected to EXT 1 or 2) that delivers switching voltage to playback, its picture and sound will be reproduced immediately at all TV presets. (This function is available only for analogue TV and DTV mode.)

You can search for stations automatically or manually as well as set the menu language, time and date, child lock, on-screen displays, etc.

TV menu

Setup Geometry

Channels

Child lock

Auto formaton

Language

Factory settings

Miscellaneous

Channels

The menu contains the automatic station search and the manual station settings. You can re-sort stations, enter and change station names, and delete stations.

ESearch wizard

Use this menu to search for stations automatically once certain settings have been made. (See page 8, Initial auto installation (Analogue) for details.)

1Press MENU and the TV menu screen displays.

2Press c/d to select “Setup”, and then press OK.

Press a/b to select “Channels”, and then press OK.

Press a/b to select “Search wizard”, and then press OK.

• You will get a table for the auto station search.

3If necessary select “Change search settings”, and then press OK. Otherwise skip to step 8.

4Press a/b/c/d to select your country or area listed on the screen, and then press OK.

5Indicate whether you wish to have “all” stations or “new ones only” searched for using c/d, and then press OK.

6Select the desired TV/colour standard, and then press OK.

7Specify from which station position onwards the stations are to be stored, and then press OK.

8Press a/b to select “Start search”, and then press OK.

NOTE

•The station search may take some time.

•Do not make any entries or switch off the set during this time.

•When the search has ended you will be shown the found and stored stations sorted in numerical order.

•After the station search has been completed, close the table by pressing END.

16