ZyXEL Communications 2602HWNLI-D7A manual TCP/IP Configuration, ∙ Setting up the Prestige router

Prestige 2602HWNLI-D7A Support Notes

∙In the Select Network Component Type windows, select Protocol and click Add.

∙In the Select Network Protocol windows, select Microsoft from the manufacturers, then select TCP/IP from the Network Protocols and click OK.

3.TCP/IP Configuration

Follow these steps to configure Windows TCP/IP:

∙In the Control Panel/Network window, click the TCP/IP entry to select it and click Properties button.

∙In the TCP/IP Properties window, select obtain an IP address automatically.

Note: Do not assign arbitrary IP address and subnet mask to your PCs, otherwise, you will not be able to access the Internet.

∙Click the WINS configuration tab and select Disable WINS Resolution.

∙Click the Gateway tab. Highlight any installed gateways and click the Remove button until there are none listed.

∙Click the DNS Configuration tab and select Disable DNS.

∙Click OK to save and close the TCP/IP properties window

∙Click OK to close the Network window. You will be prompted to insert your Windows CD or disk. When the drivers are updated, you will be asked if you want to restart the PC. Make sure your Prestige is powered on before answering Yes to the prompt. Repeat the above steps for each Windows PC on your network.

∙Setting up the Prestige router

The following procedure is for the most typical usage of the Prestige where you have a single-user account (SUA). The Prestige supports embedded web server that allows you to use Web browser to configure it. Before configuring the router using Browser please be sure there is no Telnet or Console login.

1. Retrieve Prestige Web

Please enter the LAN IP address of the Prestige router in the URL location to retrieve the web screen from the Prestige. The default LAN IP of the Prestige is 192.168.1.1. See the example below. Note that you can either use http://192.168.1.1

2. Login first

10

All contents copyright (c) 2007 ZyXEL Communications Corporation.