ZyXEL Communications 2602HWNLI-D7A manual Message, Waiting, Indication, Time, Call Forward, Back

Prestige 2602HWNLI-D7A Support Notes

	Select RFC 2833 to send the DTMF tones in RTP packets.
	Select PCM (Pulse Code Modulation) to include the DTMF tones in the
	voice data stream. This method works best when you are using a codec that
	does not use compression (like G.711). Codecs that use compression (like
	G.729) could distort the tones.
	Select SIP INFO to send the DTMF tones in SIP messages.
MWI	Enable Message Waiting Indication (MWI) to have your phone give you a
(Message	message–waiting (beeping) dial tone when you have a voice message(s).
Waiting	Your voice service provider must have a messaging system that supports
Indication)	this feature.
	Use this field to set how long the SIP server should continue providing the
Expiration	message waiting service after receiving a SIP SUBSCRIBE message from
	the Prestige. The SIP server stops providing the message waiting service if
Time
	it has not received another SIP SUBSCRIBE message from the Prestige
	before this time period expires.
Call Forward	Select which call forwarding table you want the Prestige to use to block or
	redirect calls. You can use a different call forwarding table for each SIP
Table	account or use the same call forwarding table for both.
Back	Click Back to return to the previous screen without saving configuration
	changes.
Apply	Click Apply to save your changes back to the Prestige.

Phone book Speed dial

Prestige allows you to configure up to 10 SIP numbers in the phone book for speed dial.

143

All contents copyright (c) 2007 ZyXEL Communications Corporation.