ZyXEL Communications 2602HWNLI-D7A manual CLI Command List

Prestige 2602HWNLI-D7A Support Notes

1. Trace LAN packet

1.1Disable the capture of the WAN packet by entering: sys trcp channel mpoa00 none

1.2Enable the capture of the LAN packet by entering: sys trcp channel enet0 bothway

1.3Enable the trace log by entering: sys trcp sw on & sys trcl sw on

1.4Wait for packet passing through the Prestige over LAN

1.5Disable the trace log by entering: sys trcp sw off & sys trcl sw off

1.6Display the trace briefly by entering: sys trcp brief

1.7Display specific packets by using: sys trcp parse <from_index> <to_index>

2. Trace WAN packet

1.1Disable the capture of the LAN packet by entering: sys trcp channel enet0 none

1.2Enable the capture of the WAN packet by entering: sys trcp channel mpoa00 bothway

1.3Enable the trace log by entering: sys trcp sw on & sys trcl sw on

1.4Wait for packet passing through the Prestige over WAN

1.5Disable the trace log by entering: sys trcp sw off & sys trcl sw off

1.6Display the trace briefly by entering: sys trcp brief

1.7Display specific packets by using: sys trcp parse <from_index> <to_index>

CLI Command List

The latest CI command list is available in release notes of every ZyXEL firmware release. Please go to ZyXEL public WEB site http://www.zyxel.com/support/download.php to download firmware package (*.zip), you should unzip the package to get the release note in PDF format.

246

All contents copyright (c) 2007 ZyXEL Communications Corporation.