Prestige 2602HWNLI-D7A Support Notes

Two new protocol filter interfaces in menu 3.2.1 allow you to accept or deny LAN packets from/to the IP alias 1 and IP alias 2 go through the Prestige. The filter set in menu 3.1 is used for main network configured in menu 3.2.

IP Alias Setup

1.Edit the first network in menu 3.2 by configuring the Prestige's first LAN IP address.

Menu 3.2 - TCP/IP and DHCP Setup

DHCP Setup

DHCP= Server

Client IP Pool Starting Address= 192.168.1.33

Size of Client IP Pool= 32

Primary DNS Server= 0.0.0.0

Secondary DNS Server= 0.0.0.0

Remote DHCP Server= N/A

TCP/IP Setup:

IP Address= 192.168.1.1

IP Subnet Mask= 255.255.255.0

RIP Direction= None

Version= N/A

Multicast= None

IP Policies=

Edit IP Alias= Yes

Press ENTER to Confirm or ESC to Cancel:

Key Settings:

DHCP Setup

TCP/IP Setup

If the Prestige's DHCP server is enabled, the IP pool for the clients can be any of the three networks.

Enter the first LAN IP address for the Prestige. This will create the first route in the enif0 interface.

77

All contents copyright (c) 2007 ZyXEL Communications Corporation.

Page 77
Image 77
ZyXEL Communications 2602HWNLI-D7A manual Key Settings, Dhcp Setup TCP/IP Setup