Lincoln Electric IM827-D manual Limit Setting, Machine SETUP/USER Preferences

b-9	OPERATION	b-9
LIMIT SETTING

The MSP4 can be optionally configured to limit the operator’s range of control of any weld parameter (weld WFS, arc control, etc.). Limits are only available with the Dual Procedure/Memory Panel.

MACHINE SETUP/USER PREFERENCES

The MSP4 can be used to configure and troubleshoot the machine.

ACCESSING THE MACHINE SETUP MENU

To access the Machine Setup menu, press both MSP4 push buttons simultaneously. The MSP4 7-segment display will dis- play the first user preference, "P.0", and the SETUP LED will illuminate.

•Pressing the left MSP4 pushbutton will exit the entire Machine Setup menu while in the P.0 user preference.

•Turning the MSP4 encoder knob will select other available User Preferences.

•To exit the User Preference Menu, either rotate the MSP4 encoder until P.0 is displayed and press the left MSP4 push- button or press both MSP4 push buttons simultaneously at any time.

POWER FEED™ 10M SINGLE WIRE FEEDER