Prestige 2602HWNLI-D7A Support Notes

Troubleshooting

Before you begin

The Prestige is shipped with the following factory default:

1.IP address = 192.168.1.1, subnet mask = 255.255.255.0 (24 bits)

2.DHCP server enabled with IP pool starting from 192.168.1.33

3.Default SMT menu password = 1234

Setting up the PC (Windows OS)

1.Ethernet connection

All PCs must have an Ethernet adapter card installed.

If you only have one PC, connect the PC's Ethernet adapter to the Prestige's LAN port with a crossover (red one) Ethernet cable.

If you have more than one PC, both the PC's Ethernet adapters and the Prestige's LAN port must be connected to an external hub with straight Ethernet cable.

2.TCP/IP Installation

You must first install TCP/IP software on each PC before you can use it for Internet access. If you have already installed TCP/IP, go to the next section to configure it; otherwise, follow these steps to install:

In the Control Panel/Network window, click Add button.

9

All contents copyright (c) 2007 ZyXEL Communications Corporation.

Page 9
Image 9
ZyXEL Communications 2602HWNLI-D7A manual Ethernet connection, All PCs must have an Ethernet adapter card installed