Menu operations

Miscellaneous

ENo signal off

When set to “Enable” the TV will automatically enter the standby mode if there is no signal input for 6 minutes.

TV menu ->Setup

Miscellaneous

Channels

Child lock

 

 

 

 

 

 

No signal off

Enable Disable

 

On-screen displays

 

 

Time and date

 

 

Geometry menu

You can set the geometry values of the picture such as picture position and phase relation. The adjustments are stored independently for each input mode.

TV menu

Geometry

Picture

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Picture horizontal

0

 

 

 

 

 

 

 

 

Picture vertical

0

 

 

 

 

 

 

 

 

Phase position

0

 

 

 

 

 

 

 

 

 

 

 

 

NOTE

When a TV programme fi nishes, this function may not operate.

This function is not available in DTV mode.

EOn-screen displays

Here you can determine which on-screen displays are to be shown by pressing p on the remote control.

Items

Description

 

 

On-screen display

Sets the duration of the TV status and station

time

name display.

 

• This setting also affects other TV screens.

 

(Volume, Surround, etc.)

 

 

Sound mode

Sound mode display on/off (“yes”/“no”)

Picture horizontal

Sets the horizontal picture position by moving the picture left and right.

Picture vertical

Sets the vertical picture position by moving the picture up and down.

Phase position

PC only

Adjusting the phase relation ensures a picture without fl icker and noise. (Available only for RGB signal)

Time

Time information display on/off (“yes”/“no”)

ETime and date

When you receive teletext, the correct date and time setting is picked up automatically by the set.

If you do not receive teletext, you should set the “Date” and “Time” manually. Also you have additional items you can adjust as outlined below.

NOTE

Time and date information confi gured manually cannot be overridden automatically by the set.

If the power to the set is cut off (disconnection of AC cord, power outage, etc.), the auto time acquisition mode through teletext reactivates.

Items

Description

 

 

Time

If you receive a station with teletext after

 

switching on your TV set, the time and date are

 

automatically registered. In the case of some

 

stations, the date may have to be entered

 

manually. For stations without teletext, enter the

 

time (00:00 to 23:59) and the date (day.month.

 

year) using the numeric buttons on the remote

 

control.

 

 

Date

See the above item “Time”.

 

 

Beginning of

Enter the date for the beginning of daylight-

daylight-saving

saving time if it deviates from the date

time

calculated automatically.

 

 

End of daylight-

Enter the date of the end of daylight-saving

saving time

time if it deviates from the date calculated

 

automatically.

 

 

18

Page 20
Image 20
Sharp LC-37XD1E operation manual Geometry menu, Menu operations Miscellaneous, Picture horizontal, Picture vertical