Connecting external devices

SCART connection

Example of connectable devices

EVCR

EDVD player/recorder

q

r

VCRDecoder

SCART cable (supplied accessory)/Conversion cable

SCART cable

NOTE

In cases when the decoder needs to receive a signal from the TV, make sure to select the EXT 1 terminal to which the decoder is connected in “Manual adjust” in the “Analogue setting” menu (Page 32).

You cannot connect the VCR with decoder using a fully wired SCART cable when selecting “Y/C” under “EXT 1” in the “Input select” menu.

Y PB PR Component connection

(CB) (CR)

Example of connectable devices

EVCR

EDVD player/recorder

You will enjoy accurate colour reproduction and high quality images through the EXT 3 terminal when connecting a DVD player/recorder or other device.

s

 

 

t

 

(G)

(B)

(R)

R L

Y

PB

PR

 

 

(CB) (CR)

AUDIO

COMPONENT

Stereo conversion

RGB component

cable*

 

cable (supplied

 

 

accessory)/

 

 

Conversion cable

*The supplied conversion cable (AV cable) is only used for the EXT 2 terminal, not for the Audio IN/OUT terminal. Use a stereo conversion cable (commercially available) instead.

EAfter connecting

You must select the appropriate input source and input signal settings for component connection to enjoy high quality image through the EXT 3 terminal.

Selecting the component signal

1Press bto select “EXT 3” from the “INPUT” menu, and then press ;.

2Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “Input select” > select “COMPONENT”.

Setting audio output

Go to “Menu” > “Setup” > “Option” > “Terminal setting” > “PC input” > “Audio select” > select “Video+Audio”.

21

Page 23
Image 23
Sharp LC-40LE821E, LC-46LE821E Connecting external devices, Scart connection, PB PR Component connection, After connecting