3
Introduction

Caring for the front panel

Turn off the main power and unplug the AC cord from the wall outlet before handling.
Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.). To
protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth
(wet/dry sheet type cloth, etc.). This may damage the surface of the front panel.
Wiping with a hard cloth or using strong force may scratch the surface of the front
panel.
Use a soft damp cloth to gently wipe the front panel when it is really dirty (It may
scratch the surface of the front panel when wiped strongly).
If the front panel is dusty, use an anti-static brush, which is commercially available, to
clean it.

WARNING

To prevent the spread of fire, keep candles or other open flames

away from this product at all times.

3D glasses

Prevention of accidental ingestion

Keep the accessory out of the reach of small children. Small children can accidentally
swallow these parts.
If a child accidentally swallows any of these parts, seek immediate medical attention.

Do not disassemble

Do not disassemble or modify the 3D glasses except when recycling the batteries.
Do not modify the 3D glasses.

Caution for lithium battery

Batteries must not be exposed to excessive heat such as direct sunlight or fire.
Replace only with the same or equivalent type of battery. The battery may explode if
improperly replaced.
Take care not to reverse the battery poles (+ and –) when loading the battery. Follow
the correct procedure when loading the battery. Loading the battery incorrectly may
damage the battery or cause it to leak battery fluid, which could result in a fire, injury
or damage.

Handling the 3D glasses

Do not drop, exert pressure on, or step on the 3D glasses. Doing so may damage the
glass section, which may result in injury.
Be careful not to trap your finger in the hinge section of the 3D glasses. Doing so
may result in injury.
Pay special attention when children are using this product.

Using the 3D glasses

The 3D glasses vision should be limited. Security advisory establishes a maximum of
3 hours visualization, and in any case no more than one show length, break included.
Use the 3D glasses only for the specified purpose.
Do not move around while wearing the 3D glasses. The surrounding area appears
dark, which may result in falling or other accidents that may cause injury.

Caring for the 3D glasses

Use only the cloth provided with the 3D glasses to clean the lenses. Remove dust
and soil from the cloth. Any dust or other soiling on the cloth may result in scratches.
Do not use solvents such as benzene or thinners as doing so may damage the
coating.
When cleaning the 3D glasses, take care not to allow water or other fluids to come
into contact with the glasses.
Always store the 3D glasses in the case provided when not in use.
When storing the 3D glasses, avoid very humid or hot locations.

Viewing 3D images

If you experience dizziness, nausea, or other discomfort while viewing 3D images,
discontinue use and rest your eyes.
Do not use the 3D glasses if they are cracked or broken.