Sharp LC-80LE646S, LC-80LE646E View settings, Digital setting, Auto installation, Programme setup

Basic adjustment

View settings						4 Press a/bto select the broadcast standard		Digital setting
						you want to search, and then press ;.
						E Digital search
Go to “HOME” > “TV Menu” > “Setup” >								Terrestrial
“View setting”.						After selecting the service you want to search,	You can reconfigure the following settings when you
						either “Terrestrial” or “Cable”, refer to Digital
					Menu		select “Terrestrial” in the initial auto installation or
						broadcast setting on page 15.
	CH list			Setup			the “Auto installation” menu.
						E Analogue search
	:Enter	:Back					E Additional search
						The TV searches for, sorts and stores all the
							Use this menu to add new services automatically
				View setting		receivable TV stations. Refer to Analogue	after “Digital search” in the “Auto installation” menu
						broadcast setting on page 15.
							has been completed.
			Auto installation			E Satellite search	E Manual search
						After selecting “Satellite search”, the current
			Channel settings				Add new services within a specified frequency band.
						DVB-S/S2 setting screen is displayed. Refer to	• Enter the frequency using 0_9 numeric buttons.
			Quick start
						the “Satellite search” setting on page 16.	• You can perform “Manual search” with a service number
								only when the five Nordic countries have been selected
			Individual setting			Important information:
								in the country setting.
						Satellite services are only available for the 645 model	E Manual adjust
						series.	Configure various settings for each service using the
	View setting
	Auto installation					NOTE	colour (R/G/Y/B) buttons.

• After selecting “Next” in the DVB-S/S2 setting screen,

The TV automatically detects and stores all available

Service

Service

Lock

CH skip

Old LCN

you need to select your preferred satellite broadcast to

no.

name

services in your area. This function also allows you

start searching.

to perform the channel setting for digital, satellite

View setting

and analogue individually and reconfigure the

Programme setup

settings after the initial auto installation has been

completed.

You can reconfigure the DTV service settings

1 Go to “HOME” > “TV Menu” > “Setup” > “View

Lock

CH skip

Delete

Sort

automatically or manually.

setting” > “Auto installation”.

1

Press a/bto select the desired service.

1

Go to “HOME” > “TV Menu” > “Setup” > “View

2 Press c/dto select “Yes”, and then press ;.

2

Press the colour button on the remote control

setting” > “Channel settings” > “Programme

3 Press a/b/c/dto select the desired

setup”.

unit corresponding with the item you want to

language, and then press ;.

2

Press a/bto select the broadcast standard

reconfigure.

NOTE

• The ✔ mark indicates the operation is set to on.

you want to reconfigure, and then press ;.

Each time the colour button is pressed, you can

• PIN input is required when executing “Auto installation”.

NOTE

switch the corresponding operation on/off.

The default PIN is “1234”. To change the PIN setting,

• PIN input is required when executing “Programme

refer to Individual setting — PIN (Page 38). To reset the

setup”. The default PIN is “1234”. To change the PIN

PIN setting (PIN input will no longer be needed), refer to

setting, refer to Individual setting — PIN (Page 38).

Reset the PIN (Page 61).

To reset the PIN setting (PIN input will no longer be

• You cannot set the Home/Store setting and the country

needed), refer to Reset the PIN (Page 61).

setting in “Auto installation” in the “Setup” menu. If

you want to reconfigure those settings, automatically

execute initial auto installation after executing “Reset”

from the “Setup” menu.

35

• The current country setting is displayed on the screen.