Useful viewing functions
Terminal setting
Option
Audio select
When using the PC terminal or HDMI 2 terminal, you must select which terminal uses the AUDIO (L/R) jack for analogue audio input.
Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Audio select”.
When selecting “HDMI 2” from the “INPUT” menu
| Item | |
HDMI | When connecting devices (including a | |
PC) with a HDMI cable to the HDMI 2 | ||
| terminal. | |
| When connecting devices (including | |
HDMI + | a PC) with a DVI/HDMI cable to | |
the HDMI 2 terminal and inputting | ||
Analogue | ||
analogue audio signals from the AUDIO | ||
| ||
| (L/R) jack. |
When selecting “PC” from the “INPUT” menu
| Item |
Video | When connecting devices with an |
AV cable to the PC terminal, displays | |
| images without audio. |
Video+Audio | When connecting a PC to the PC |
terminal, and inputting analogue audio | |
| signals from the AUDIO (L/R) jack. |
Skipping specified inputs
Option
Input skip
This setting allows you to skip the inputs on the input source selection operation.
Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Input skip”.
NOTE
•When you select “ATV”, “DTV” or “SAT”, the skip function works only when using the b button on the TV.
Input source settings
Option
Input select
For setting the signal type of external equipment.
1Press b to select the input source for setting the input signal (“EXT1”) from the “INPUT” menu, and then press ;.
2Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Input select”.
| Item |
EXT1 | Y/C, CVBS, RGB |
NOTE
•If no (colour) image displays, try changing to another signal type.
•Check the operation manual of the external equipment for the signal type.
Option
Input label
You can label each input source with a custom description.
1Press b to select the desired input source from the “INPUT” menu, and then press ;.
2Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Input label”.
3Select each character of the new name for the input source with using the software keyboard (Page 13).
NOTE
•The label can be six characters or less.
•This menu can be changed in the case of the following input sources:
−
−
−PC
CH list
INPUT
TV
Switchable
Selecting the HDMI picture size automatically
Option
HDMI auto view
This function allows you to automatically change to the appropriate picture size when viewing an HDMI signal using the HDMI 1, 2, 3 and 4 terminals.
1Press b to select the input source (“HDMI 1”, “HDMI 2”, “HDMI 3” or “HDMI 4”) connected to your HDMI device, and then press ;.
2Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “HDMI auto view”.
41
