Preparation
Attaching the stand unit
•Before attaching (or detaching) the stand, unplug the AC cord.
•Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged.
•Be sure that two or more persons attach the stand.
CAUTION
•Attach the stand in the correct direction.
•Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
•After attaching the stand to the TV, do not hold the stand when you put up, set up, move or lay down the TV.
•Do not remove the stand from the TV unless using a wall mount bracket to mount it.
1Confirm that there are 12 screws (eight M6 screws, four M5 screws) supplied with the stand unit.
21Set the supporting post for the stand unit onto the polystyrene foam. 2Attach the stand base to the supporting post.
3Insert and tighten the M6 screws (length: 16mm) into the eight holes on the bottom of the stand base.
•Hold the stand unit securely with one hand, and then tighten the screws.
w For 80/90 inch models
Stand base
3
Long screws
2
1
1
FRONT
Supporting post
w For 70 inch models
Stand base |
|
|
| Long screws | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TV front
Supporting post
3Insert the stand into the openings on the bottom of the TV (hold the stand so it will not drop from the edge of the base area).
•Make sure that the stand is firmly inserted into the TV. Improper installation may result in tilting of the TV set.
•Instead of using a soft cushion, the cardboard box that the TV is packed in can be assembled and used as a work table (refer to the instructions on the box to assemble the work table).
Soft cushion
5
