Sharp LC-80LE657EN Terminal setting, Digital audio output Input skip, Input label, Audio select

Useful viewing functions

Terminal setting
		Skipping specified inputs
	Option
			Option
	Digital audio output		Input skip

Option

Input label

You can label each input source with a custom description.

This function allows you to select the digital audio signal type.

Go to “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Digital audio output”.

	Item
PCM	To stereo audio system
Bitstream	To multi-channel Dolby Digital, DTS
	audio system

Option

Audio select

When using the PC terminal or HDMI 2 terminal, you must select which terminal uses the AUDIO (L/R) jack for analogue audio input.

Go to “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Audio select”.

When selecting “HDMI 2” from the “INPUT” menu

	Item
HDMI	When connecting devices (including a PC)
	with a HDMI cable to the HDMI 2 terminal.
HDMI +	When connecting devices (including a
	PC) with a DVI/HDMI cable to the HDMI
Analogue	2 terminal and inputting analogue audio
	signals from the AUDIO (L/R) jack.

When selecting “PC” from the “INPUT” menu

	Item
Video	When connecting devices with an
	AV cable to the PC terminal, displays
	images without audio.
Video+Audio	When connecting a PC to the PC
	terminal, and inputting analogue audio
	signals from the AUDIO (L/R) jack.

This setting allows you to skip the inputs on the input source selection operation.

Go to “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Input skip”.

NOTE

•When you select “ATV”, “DTV” or “SAT”, the skip function works only when using the b button on the TV.

•If you connect external equipment to an HDMI terminal which you have set to be skipped, a notification message appears on the display when a signal is received from the connected external equipment. Press “OK” to reset the related skipping setting so that the input terminal becomes available.

Input source settings

Option

Input select

For setting the signal type of external equipment.

1Press b to select the input source for setting

the input signal (“EXT1”) from the “INPUT” menu, and then press ;.

2Go to “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Input select”.

	Item
EXT1	Y/C, CVBS, RGB

NOTE

•If no (colour) image displays, try changing to another signal type.

•Check the operation manual of the external equipment for the signal type.

1Press b to select the desired input source from the “INPUT” menu, and then press ;.

2Go to “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Input label”.

3Select each character of the new name for the input source with using the software keyboard (Page 14).

NOTE

•The label can be six characters or less.

•This menu can be changed in the case of the following input sources:

−EXT1–3

−HDMI1–4

−PC

CH list

INPUT

TV

Switchable

Selecting the HDMI picture size automatically

Option

HDMI auto view

This function allows you to automatically change to the appropriate picture size when viewing an HDMI signal using the HDMI 1, 2, 3 and 4 terminals.

1Press b to select the input source (“HDMI 1”,

“HDMI 2”, “HDMI 3” or “HDMI 4”) connected to your HDMI device, and then press ;.

2Go to “TV Menu” > “Setup” > “Option” > “Terminal setting” > “HDMI auto view”.

47