Sharp LC-90LE757K, LC-90LE757RU Checking signal strength, Channel strength DVB-T/T2/C/S/S2

Initial auto installation
Checking signal strength and			E Checking channel strength			5 Position and align the antenna so that the
			4 Press a/bto select “Channel strength”, and			maximum possible values for “Signal strength”
channel strength (DVB-T/T2/C/S/S2)
						and “Quality” are obtained.
			then press ;.
						NOTE
If you install a DVB-T/T2/C/S/S2 antenna for the first			• You can input a specified frequency band using the
time or relocate it, you should adjust the alignment			0_9 numeric buttons.			• The values of “Signal strength” and “Quality” indicate
of the antenna to receive a good reception while			Channel strength of DVB-T/T2			when to check the appropriate alignment of the
						antenna.
checking the antenna setup screen.
			Supply voltage			Supplying power to the antenna
1 Go to “TV Menu” > “Setup” > “View setting” >				Frequency	MHz
			Signal strength
“Channel settings” > “Antenna setup-DIGITAL”.			Channel strength	CH No.		You must supply power to the antenna in order
2 Press a/bto select “Digital setup” or “Satellite				Signal strength
						to receive digitally/terrestrially broadcast stations
setup”, and then press ;.
				Current	Max.	after connecting the antenna cable to the antenna
E Checking signal strength
				Quality		terminal on the rear of the TV.
3 Press a/bto select “Signal strength”, and then				Current	Max.	1 Go to “TV Menu” > “Setup” > “View setting” >
press ;.						“Channel settings” > “Antenna setup-DIGITAL” >
Signal strength for DVB-T/T2/C			Channel strength of DVB-C			“Supply voltage”.
						2 Press c/dto select “On”, and then press ;.
Supply voltage
			Supply voltage
Signal strength				Frequency	MHz
			Signal strength
Channel strength	CH No.			Symbol rate
			Channel strength
	Signal strength			QAM modulation
	Current	Max.		Signal strength
	Quality			Current	Max.
	Current	Max.		Quality
				Current	Max.
Signal strength for DVB-S/S2

Signal strength

Channel strength

Signal strength
Current	Max.
Quality
Current	Max.

Channel strength of DVB-S/S2

Signal strength	Frequency	MHz
Channel strength
	Symbol rate
	Band	Vert/Low
	Signal strength
	Current	Max.
	Quality
	Current	Max.

18