Sharp LC 15A2U SET UP Continued, ADJUSTMENT Continued, Saving broadcast TV channels into memory

Press MENU to display the MENU screen, then press CH (])/([) to move the “>” mark to “SET UP”.

ADJUSTMENT (Continued)

SET UP (Continued)

■Saving broadcast TV channels into memory.

1.1Press MENU to display the MENU screen, then press CH (])/([) to move the “>” mark to SET UP.

1.2Press VOL (+)/(–)to display SET UP mode, then press CH (])/([) to move the “>” mark to “CH SETTING”.

1.3Press VOL (+)/(–)to display CH SETTING screen.

1.4Press CH (])/([) to move the “>” mark to “CH SEARCH”, then press VOL (+)/(–)to display CH SEARCH screen.

START

2.1Press VOL (+). The tuner will search through all available chan- nels in your area and add them into the TV’s memory.

STOP

2.2Press VOL (–). CH SEARCH will stop at the current channel and will not add any higher channels.

(CH SETTING mode)

(CH SEARCH mode)

2.3Press MENU to exit.

■Adding weak or additional channels or erasing unwanted channels from TV memory.

1.1

1.2Press VOL (+)/(–)to display SET UP mode, then press CH (])/([)

to move the “>” mark to “CH SETTING”.

1.3 Press VOL (+)/(–)to display CH SETTING mode, then press CH (])/([) to move the “>” mark to “CH MEMORY”.

2.1 Press VOL (+)/(–)to display CH MEMORY.

2.2 Use CH (])/([) or CHANNEL SELECT to select each desired channel to add or erase.

2.3Press VOL (+) to add a channel to the TV’s memory or press VOL (–)to erase a channel from the TV’s memory.

2.4Press MENU to exit.

Note:

(CH SETTING mode)

VOL (+)	VOL (–)
to add channel 12	to erase channel 12
to the TV memory	to the TV memory

■If you press VOL (+) again, auto-program will start again, and the previously memorized channels will be lost.

24