Sharp LC 15A2U operation manual ADJUSTMENT Continued, Adjusting the V-CHIP Settings Continued

ADJUSTMENT (Continued)

Adjusting the V-CHIP Settings (Continued)

[3] ACTIVATE ON TO TURN ON V-CHIP BLOCK

1 Press MENU to access MENU screen.

2 Press CH (])/([) to move the “>” mark to V-CHIP BLOCK.

3 INPUT SECRET NO. will be displayed. Enter the 4-digit SECRET No. using the chanel select key. (Secret No. is not indicated on the display.)

0 1 2 3

4 Press MENU and SECRET No. is registered.

[4]TO CANCEL THE V-CHIP BLOCK SCREEN WHILE V-CHIP BLOCK HAS BEEN ACTIVATED.

1“V-CHIP HAS BEEN ACTIVATED” will be displayed if you watch the program with Program Rating data as same as you

configured.

Notes:

■V-CHIP HAS BEEN ACTIVATED” will not be displayed if STATUS is not configured

to “ON”.

2 Press MENU, then “INPUT SECRET No.” will be displayed.

3 Enter the 4-digit SECRET No. using the chanel select key, then V- CHIP BLOCK temporarily will be canceled. If the wrong SECRET No. is chosen, “SECRET No. IS INCORRECT” will be displayed. Input the SECRET No. again in this case.

Note:

■If you change Power from OFF to ON, then V-CHIP BLOCK will be activated ON again.

Also, if you select V-CHIP BLOCK using MENU again, V-CHIP BLOCK will be turned ON again.

31