Sharp LC 15A2U operation manual Changing the Channels, BASIC OPERATION Continued, Channel Select

BASIC OPERATION (Continued)

Changing the Channels

Changing channels using the CHANNEL SELECT on the remote control

•To handle the increasing number of channels available, this LCD TV set allows you to select up to 125 positions (Channels 1 to 125). One-digit, two-digit and three-digit methods of selection can be used. Follow the procedure shown below to select channels.

POWERMENU

CH

TV/VIDEO

CH

FLASHBACK

1 2 3

DISPLAY

4 5 6

7 8 9

MUTE

0

LCDTV

To select a one-digit channel (e.g.,

Channel 5):

Basically, the 2-digit entry is used.

1 Press the button.

2 Press the 5 button.

CHANNEL

SELECT

To select a three-digit channel (e.g.,

Channel 115):

1 Press the button.

2 Press the button.

3 Press the 5 button.

Note:

■Complete this procedure within 3 seconds, otherwise the selection will not be made.

Changing channels with the CH (])/([) on the remote control.

Air CH (]) 2 → 3 → . . . → 68 → 69 → 2 → 3 → . . .

CH ([) 3 → 2 → 69 → 68 → . . . → 3 → 2 → . . .

Cable Press the CH (]) and the channels change in the order shown below: 1 → 2 → 3 → . . . → 125 →1 → 2 → 3 → . . .

Press the CH ([) button and the channels change in the order shown below: 3 → 2 → 1 → . . . → 125 → . . . → 3 → 2 → 1 → . . .

16