Watching TV (TV Guide On Screen)

Basic initial setup

Follow the on-screen prompts to configure the basic settings.

1

Select your location.

 

1Press a/bto select the country.

 

2Enter the ZIP code (or postal code) for

 

your location using the number buttons

 

or a/b.

2

Indicate the cable service connection.

 

Press a/bto select “Yes” or “No”, and then

 

press ENTER.

 

• If your answer is “No”, skip to step 10.

3

Indicate the cable box connection.

Press a/bto select “Yes” or “No”, and then press ENTER.

• If your answer is “No”, skip to step 11.

NOTE

•To receive TV program listings in the TV Guide On Screen system, please ensure to connect your cable box to the input marked “VIDEO”, if you are connecting your cable box to your TV using INPUT 1 or INPUT 2. Do not connect the cable box to the “COMPONENT” video of INPUT 1 or INPUT 2, as you will not receive any TV program listings through this input.

4 Indicate which input the cable box is plugged into.

Press a/b to select the input you connected, and then press ENTER.

•To receive TV program listings in the TV Guide On Screen system, if you select “Input 1” or “Input 2”, please ensure your cable box is connected to the input marked “VIDEO”, and proceed to step 6. Do not connect your cable box to the “COMPONENT” video of INPUT 1 or INPUT 2, as you will not receive any TV program listings. If you select “Analog” input, proceed to step 5.

8 The TV Guide On Screen is now ready for testing. Do the following:

1Tune your cable box to channel 02.

2Make sure to leave your cable box turned on, and then press ENTER.

 

The TV Guide On Screen system will conduct

 

a series of tests and when the testing is

 

completed the next screen will be displayed

 

automatically.

 

Do not press any buttons while testing is in

 

progress.

9

Confirm that your cable box is now tuned

 

to channel 09.

 

Press a/bto select “Yes”, “No” or “Test this

 

code again”, and then press ENTER.

 

• If you select “Yes”, go to the next step.

 

• If you select “No”, a different code is tested in

 

the previous screen.

 

• If you select “Test this code again”, the same

 

code is tested again in the previous screen.

10

Indicate the antenna connection.

Press a/bto select “Yes” or “No”, and then press ENTER.

• If you select “Yes”, go to the next step.

• If you selected “No” in step 2, you must connect an antenna to your TV and select “Yes” to receive a channel lineup and listings.

5

Indicate the channel your TV is tuned to

 

when using the cable box.

 

Press a/bto select from “Ch 2”, “Ch 3” and

 

“Ch 4”, and then press ENTER.

 

• Please consult your cable provider if you are

 

unsure.

6

The diagram on the screen shows the correct

 

way to connect the G-LINK cable from the

 

back of the TV to the cable box.

 

Make sure the G-LINK cable is properly

 

connected, and then press ENTER.

7

Indicate the cable box brand name.

 

Press a/bto select the cable box brand,

and then press ENTER.

• Press a/bto view more cable box brands.

11 Confirm the settings.

Confirm the settings displayed on the screen and press a/bto select “Yes, end setup” or “No, repeat setup process”, and then press ENTER.

Press ENTER to continue.

Press ENTER to continue.

NOTE

•Please do not use the CableCARD security module while using cable box.

21