Basic adjustment settings

EZ Setup

You can run EZ Setup again, even after setting up the preset channels.

Language setting

Select from among 3 languages: English, French and Spanish.

1 Press MENU and the MENU screen displays.

2 Press c/dto select “Setup”.

3 Press a/b to select “EZ Setup”, and then press ENTER.

•If you already set the Secret No., go to step 4. If not, skip to step 5.

Channel Setup

If initial setup does not memorize all the channels in your region, follow the instructions below to manually memorize the channels.

Antenna setting

1 Press MENU and the MENU screen displays.

2 Press c/dto select “Setup”.

3 Press a/bto select “CH Setup”, and then press ENTER.

•If you already set the Secret No., input the 4- digit secret number here. See page 68 for setting a secret number.

4 Input the 4-digit secret number by using 0 – 9.

5

Press a/b to select the desired language

 

listed on the screen, and then press ENTER.

Antenna setting

Make sure what kind of connection is made with your TV when selecting “Air” or “Cable” for ANALOG and DIGITAL (Cable).

6 Press c/d to select “Air”, “Cable”, for ANALOG, then press bto move down. Press c/d to select “Standard”, “HRC”, “IRC” for DIGITAL (Cable).

Press ENTER to enter the setting.

•There are 3 kinds of CATV system, including Standard, HRC and IRC. Select the one matches to your TV.

•If cable or antenna connection was selected for the ANALOG IN terminal at the time when you set up TV Guide On Screen, the analog settings cannot be changed afterward. If you need to change the analog settings, you will have to change the TV Guide On Screen settings first.

Channel search

Channel auto search makes the TV look for all channels viewable in the set area.

7

Press c/dto select “Yes” for ANALOG, then

 

press bto move down.

Press c/dto select “Yes” for DIGITAL (Air), then press bto move down.

Press c/d to select “Yes” for DIGITAL (Cable), and press bto move down. Select “Search Start”, and then press

ENTER.

• This operation makes the TV search for both ANALOG, DIGITAL (Air) and DIGITAL (Cable) channels.

NOTE

•If no channel is found, make sure what kind of connection is made with your TV and try EZ Setup again.

•Make sure what kind of connection is made with your TV.

4 Press a/bto select “Air/Cable”, and then press ENTER.

5 Press c/d to select “Air”, “Cable”, for ANALOG, then press bto move down. Press c/d to select, “Standard”, “HRC”, “IRC” for DIGITAL (Cable).

Press ENTER to enter the setting.

NOTE

•Make sure what kind of connection is made with your TV.

•There are 3 kinds of CATV system, including Standard, HRC and IRC. Select the one matches to your TV.

Channel search

Channel auto search makes the TV look for all channels viewable in the set area.

1

Repeat steps 1 to 3 in Antenna setting in

 

Channel Setup.

2

Press c/dto select “Yes” for ANALOG, then

 

press bto move down.

3 Press c/dto select “Yes” for DIGITAL (Air), then press bto move down.

Press c/d to select “Yes” for DIGITAL (Cable), and press bto move down. Select “Search Start”, and then press

ENTER.

NOTE

• Make sure what kind of connection is made with your TV.

37