Basic adjustment settings

Channel memory setting

1 Press MENU and the MENU screen displays.

2 Press c/dto select “Setup”.

Antenna Setup – DIGITAL – Air

In order to receive digital air broadcasts, you need a digital broadcast antenna. You can confirm the antenna configuration through the “Antenna Setup - DIGITAL” screen.

If necessary, adjust the direction of the antenna to obtain the maximum signal strength.

3

Press a/bto select “CH Setup”, and then

 

press ENTER.

• If you already set the Secret No., input the 4- digit secret number here. See page 68 for setting a secret number.

Signal Strength

1 Press MENU and the MENU screen displays.

4

Press a/bto select “CH Memory”, and then

 

press ENTER.

5 Press a/bto select ANALOG, DIGITAL (Air), DIGITAL (Cable) and CableCARD, and then press ENTER.

6 Perform the following steps after confirming the type of antenna connection made with your TV, and the channel type selected in Step 5.

When viewing ANALOG broadcasts:

1Press a/b, and then press c/d to select the channel to skip or not.

2Press a/bto select “Skip”, and then press c/dto select “On” or “Off”.

When viewing DIGITAL broadcasts:

1Press a/b to select the channel to skip or not, and then press c/d to select “On” or “Off”.

•On: Skips channels. (Channel selection disabled using CHr/s.)

•Off: Does not skip channels. (Channel selection enabled using CHr/s.)

NOTE

• Make sure what kind of connection is made with your TV.

2

Press c/dto select “Setup”.

3

Press a/b to select “Antenna Setup -

 

DIGITAL”, and then press ENTER.

• If you already set the Secret No., input the 4- digit secret number here. See page 68 for setting a secret number.

4 Press a/bto select “Signal Strength”.

•The signal strength of the DIGITAL (Air) antenna is displayed. The signal information is based on the current channel.

Signal Strength

Channel Strength

Signal Strength

Current

0

Max

0

 

 

 

 

Channel Strength

•The channel signal strength can also be checked separately.

1Repeat steps 1 to 3 in Signal Strength in Antenna Setup - DIGITAL - Air.

2 Press a/bto select “Channel Strength”, and then press ENTER.

3 Input the 2-digit channel number to check the signal strength of the selected channel.

•Make sure the appropriate signal strength of each channel received is obtained.

Signal Strength

Channel Strength

1 2 CH

Signal Strength

Current

0

Max

0

 

 

 

 

NOTE

• This function is available for DIGITAL (Air) only.

38