Appendix

Troubleshooting-TV Guide On Screen

Problem

Possible Solution

 

 

• LISTINGS disappeared after a

• You should begin to receive listings again within 24 hours.

power failure.

 

 

 

• Some channel numbers in the TV

• You can correct them using “Changing channel display” under SETUP.

Guide On Screen are incorrect.

 

 

 

• You have not received any local

Listings usually appear within 24 hours after a successful Setup.

program listings.

• Check the connections between the TV, cable, antenna, and the G-LINK cable if

 

using a cable box.

 

• Verify Setup information under “Changing system settings”.

 

• Make sure the cable box is on, if applicable.

 

• Review step 3 and step 4 of “Basic Initial Setup” on page 21.

 

 

• A program you set to record did

• Make sure your recorder is turned off before the recording begins.

not record.

• Make sure there is free space available for recording on the tape or recording

 

device.

 

• Check the SCHEDULE menu and verify that the program is listed, before

 

recording begins.

 

• Check the placement of the G-LINK cable in front of your recorder.

 

 

• The TV did not tune to a program

• Check the SCHEDULE menu and verify that the program is listed.

you scheduled with the reminder

• If you have a cable box, check the G-LINK cable.

feature.

 

 

 

• You set a program to “auto tune

• Check the SCHEDULE menu and verify that the program is listed as a Reminder.

TV” and it did not.

• Highlight the program under LISTINGS and do the following:

 

- Press MENU on the remote control.

 

- Use bto highlight “edit reminder”, and press ENTER.

 

- Verify that the “auto tune TV” option reads “yes”.

 

• The TV must be on at the scheduled time for “auto tune TV”.

 

 

• You set a program with the “power

• Check the SCHEDULE menu and verify that the program is listed as a Reminder.

on TV” option and it did not.

• Highlight the program under LISTINGS and do the following:

 

- Press MENU on the remote control.

 

- Use bto highlight “edit reminder”, and press ENTER.

 

- Verify that the “power on TV” option reads “yes”.

 

• The TV must be off at the scheduled time for “power on TV”.

 

 

82