Watching TV (TV Guide On Screen)

VCR setting

Connect a VCR to your TV and use the TV Guide On Screen system’s program listings to easily schedule recordings using the one-touch recording feature.

1

Set TV Guide On Screen to control your

 

VCR.

 

Press a/b to select “Yes, setup VCR

 

control”, and then press ENTER.

 

• If you select “Yes”, go to the next step.

 

• If you select “No”, setup will end.

2

This screen shows the correct way to connect

 

the G-LINK cable from the back of the TV to

 

the recording device. Make sure the G-LINK

 

cable is properly connected, and then press

 

ENTER.

3

Indicate the VCR brand name.

 

Press a/b to select the VCR brand, and

then press ENTER.

NOTE

•Up-to-date listings will begin loading over the next 24 hours when your LCD-TV is powered off. (Do not unplug the AC cord.)

•It may take more than one day for all eight days of listings to update. The guide will automatically receive updates during the period when your LCD-TV is turned off.

•To receive your channel lineup and program listings, leave your cable box on. Your VCR and LCD-TV should be turned off overnight. (Do not unplug the AC cord.)

•To record a TV program, make sure your cable box is on. Put a tape in your VCR, tune the device to the Line input, then turn the VCR off. (Do not unplug the AC cord.)

•You must redo the TV Guide On Screen system setup if you:

-Move your LCD-TV to a new ZIP or postal code.

-Cancel cable service or change cable boxes.

-Change your VCR brand or model.

7 Press ENTER twice to watch TV.

4

5

The TV Guide On Screen is now ready for testing. Do the following:

1Turn on your VCR and insert a tape.

2Play the media on the VCR, and then press ENTER.

The TV Guide On Screen system will conduct a series of tests and when the testing is completed the next screen will be displayed automatically.

Do not press any buttons while testing is in progress.

Confirm that your VCR has stopped playing.

Press a/bto select “Yes”, “No” or “Test this code again”, and then press ENTER.

•If you select “Yes”, go to the next step.

•If you select “No”, a different code is tested in the previous screen.

•If you select “Test this code again”, the same code is tested again in the previous screen.

6 Confirm the settings.

Confirm the settings displayed on the screen and press a/bto select “Yes, end setup” or “No, repeat setup process”, and then press ENTER.

Press ENTER to complete the SETUP.

22