Sharp LL-171A LL-171G operation manual Connection of headphones commercially available

Connecting the monitor and turning the monitor on and off

Connection of headphones (commercially available)

Headphones (commercially available) can be connected.

Headphone terminal

Headphones

Note:

-When the headphones are connected, no sound can be heard from the monitor speakers.

Connecting the monitor to a power source

Turning the power on

1. Turn on the main power of the monitor.

Main power switch

-When switching the main power switch on and off, always wait for an interval of at least 5 seconds. Rapid switching may result in malfunction.

2.Press the monitor's power button.

3.Turn on the computer.

English

Power terminal AC outlet

Power cord

Turn on the

computer power

Press power button. supply.

ON

When a signal is input from the computer, the power LED lights up green, and the screen is displayed. (After power is turned on, it may take a little time until the screen is displayed.)

Note for LL-171G:

-If the input terminal to which the computer is connected has not been selected, the screen will not be displayed. If necessary, perform input terminal switching. (p.16)

Notes:

-When using an analog signal, perform an automatic screen adjustment under the following conditions (p.19):

-Using the monitor for the first time.

-After having changed the system settings during use.

-When using the LL-171G with a digital connection, automatic screen adjustment is unnecessary.

-Depending on the type of computer or OS, you may need to install the monitor set-up information on your system. (p.28)

-When connecting to a notebook, if the notebook computer's screen is set to display at the same time, the MS-DOS screen may not display properly. In this case, change the setting to display only the LCD monitor.

15