Sharp LL-171A LL-171G Adjusting the screen display, Manual screen adjustment, ADJUSTMENT Menu

Adjusting the screen display

Manual screen adjustment

1.Display an image that makes the entire screen light. (p.19)

2.Display the OSD Menu by pressing the MENU button.

(Example: Displayed screen of the LL-171G)

ADJUSTMENT Menu

Select the option by pressing the / MODE button.

MENU

GAIN CONTROL Menu

Select the option by pressing the / MODE button.

MENU

COLOR CONTROL Menu

Select the option by pressing the / MODE button.

MENU

MODE SELECT-1 Menu

Select the option by pressing the / MODE button.

MENU

MODE SELECT-2 Menu

Select the option by pressing the / MODE button.

MENU

The OSD Menu closes.

Notes:

-When the LL-171G is used with a digital connection, ADJUSTMENT and GAIN CONTROL Menu adjustments are not necessary.

-The OSD Menu automatically disappears approximately 30 seconds after the last command.

-This chapter provides the procedure how to adjust the screen by using Adjustment Pattern (for Windows).

ADJUSTMENT Menu

When the LL-171G is used with a digital connection, this menu adjustment is not necessary.

AUTO

When [AUTO] is selected with the button, the [CLOCK], [PHASE], [H-POS] and [V-POS] settings are automatically adjusted.

CLOCK

The figure below demonstrates how to adjust so that vertical flicker noise is not emitted.

( buttons)

Vertical flicker noise

PHASE

The figure below demonstrates how to adjust so that horizontal flicker noise is not emitted.

( buttons)

Note:

-Adjustments to [PHASE] should be made only after [CLOCK] has been correctly set.

Horizontal flicker noise

H-POS (horizontal positioning) and V-POS (vertical positioning)

To center the Adjustment Pattern within the boundaries of the screen, adjust the left-right (H- POS) values and the up-down (V-POS) values.

( buttons)

Screen frame

Adjustment

Pattern

20